Astronomical time switch SELEKTA 170 top2
The SELEKTA 170 top2 astronomical time switch from Theben with weekly program is easy to program using OBELISK top2 software. Between 35 % and 70 % of energy costs can be saved each year with night-time switch-off.
Description
- Order No. 1700100
- Astronomical time switch with weekly program
- 1 channel
- 54 memory locations
- Astronomical time switch function (automatic calculation of sunrise and sunset times for the whole year)
- Offset for adjusting of sunrise and sunset times
- Position data via coordinates or country/city lists can be programmed
- Fixed ON-OFF switching times can be programmed (e.g. night time interruption)
- Simulation of switching times (calculated astronomical times and programmed ON/OFF switching times)
- Reversible astronomical mode (evenings ON – mornings OFF or evenings OFF – mornings ON) or can be deactivated
- DuoFix spring terminals
- For 2 conductors each
- Wire or strand (with or without wire end sleeve)
- Wire diameter: 0.5 – 2.5 mm²
- Button for releasing plug-in connection
- Text-oriented user guidance in display
- Preset date and time
- fully operable without mains connection
- Interface for OBELISK top2 memory card (PC programming)
- 2. insertable switching program
- Copying programs
- Storing programs
- 10 year power reserve (lithium battery)
- Zero-cross switching for relay-saving switching and high lamp loads
- Calculated astronomical switching times
- Programmable ON-OFF switching times
- Switching preselection
- Permanent switching ON/OFF
- Integrated operating hour counter
- Reset option
- Service function for monitoring maintenance intervals
- Holiday program
- Display back light (can be turned off)
- PIN coding
- Automatic summer/winter time changeover
- can be deactivated
- Date rule options are already stored for Europe, the USA and other countries
- own date rule options or changeover around set dates are available
Technical data
SELEKTA 170 top2 | |
---|---|
Operating voltage | 230 – 240 V AC |
Frequency | 50 – 60 Hz |
Width | 2 modules |
Installation type | DIN rail |
Type of contact | Changeover contact |
Switching output | Potential-free and phase-independent |
Opening width | < 3 mm (µ) |
Program | Weekly program, Astronomical program |
Program functions | ON-OFF |
Number of channels | 1 |
Number of memory locations | 54 |
Power reserve | 10 years |
Switching capacity at 250 V AC, cos φ = 1 | 16 A |
Switching capacity at 250 V AC, cos φ = 0,6 | 10 A |
Incandescent/halogen lamp load 230 V | 2600 W |
Energy saving lamps 230 V | 22 x 7 W, 18 x 11 W, 16 x 15 W, 16 x 20 W, 14 x 23 W |
LED lamps | < 2 W = 30 W or 2-8 W = 100 W or > 8 W = 120 W |
Fluorescent lamp load (conventional) not corrected | 2300 VA |
Fluorescent lamp load (conventional) series-corrected | 2300 VA |
Fluorescent lamp load (conventional) parallel-corrected | 730 VA |
Switching capacity min. | ca.10 mA |
Shortest switching times | 1 min |
Time accuracy | typical ± 0.5 s/day (quartz) |
Time basis | Quartz |
Stand-by consumption | 0,8 W |
Memory card supplied | no |
Test approval | VDE |
Type of connection | DuoFix spring terminals |
Keyboards | 4 touch buttons |
Housing and insulation material | High-temperature resistant, self-extinguishing thermoplastic |
Type of protection | IP 20 |
Protection class | II as per EN 60 730-1 |
Ambient temperature | -30 °C ´… +55 °C |